New Montex 8000 stenter from Monforts
The Montex 8000 stenter from Monforts includes a number of new features and options that are particularly suited for knitted fabrics, non-woven and technical textiles applications.
The new, European-built, Montex 8000 stenter from A. Monforts Textilmaschinen features a new heat recovery module incorporating a fully automatic cleaning system for its integrated heat recovery system; a reduced distance at the infeed for knitted fabrics; a new heavy duty vertical chain; new rotating disc type ‘fluff-sieves’ and a vacuum system for efficient cleaning; further improved visualisation for the company’s Teleservice facility; and two parallel integrated exhaust ducts in each chamber.
New heat recovery module
A new heat recovery module ‘Eco booster HRC’ with a fully automatic cleaning system is introduced, replacing the earlier modules, manually cleaned, tubes system.
Featuring a ‘honeycombed’ design the new system cleans itself fully automatically during machine operation and ensures continuous uninterrupted high availability.
Providing availability on a constant level, reduced downtime and no reduction in the stenters performance due to contaminated filters, the system is integrated into the Montex roof and requires no additional ductwork.
The new stenter is also available with a reduced infeed distance between the infeed roller and the needling point for knitted fabrics, preventing eventual edge curling. The distance has been further reduced by 60 mm.
Heavy duty chain
Complementing the range of Monforts chains, and following a market request, the new stenter is also available with a heavy duty, ‘Hercules’ type vertical chain; designed for heavier weight knitted, non-woven and technical textile applications. The ‘Marathon’ type vertical chain will be available further on together with the horizontal chain versions.
Improved ‘fluff’ collection
New rotating ‘disc type’ sieves, each equipped with a vacuum cleaning system is introduced as an option to collect ‘fluff’ and ensure efficient cleaning and the highest machine availability…Read More..
HTHP Beaker Dyeing Machine
Brand: Supertech Textile Instruments (Pvt) Ltd
Technical Specifications:
- Machine Type: 12 Nos. 250 ml
- Power Supply connection required: 3 Phase, Neutral-400 V AC, 50 Hz
- Space required for Bare Machine: X
- Other Utilities Needed: Running water for cooling the Glycerin Bath
Preparation before installation of Glycerin Bath Beaker Dyeing Machine:
Approx 35 Lt of 1P or ISI Grade Glycerin will be required. Please note that it is very important to have good quality glycerin will result in evaporation losses, premature oxide and sometimes even solidification. This may result to the damage to the machine. Have electrical supply readily available through 3 Phases MCB switch of proper rating. Provide running water tap so that the same can be connected to the cooling coil of the Machine.
Size Preparation Solutions
Brand Name: K B Corporation
Equipment: Size Pressure Cooker
Consisting
- Size Pressure Cooker consists of a pressurized insulated stainless steel shell suitably lagged with glass wool and covered with stainless steel sheet
- It is provided with a stainless steel agitator run by Motor and Reduction Gear for stirring
- Direct and Indirect heating stainless steel coils are provided for cooking the Size
Features
- High temperature and pressure with stirring prepare even size mixture in short time
- Viscosity and evenness of the Size is maintained for a long period
- It increases the efficiency of Sizing
- It saves labor, time and steam
- Serves the purpose of preparatory stand cooking vessel and storage vessel
- Available in different capacity as per requirement
